规格型号 | YXRG-15 (200) |
---|---|
流量 | 2~85立方/小时 |
功率 | 1.5~35kw |
压力 | 1Mpa~2Mpa |
重量 | 60~2000kg |
水平输送能力 | 100m |
垂直输送 | 3~15m |
软管泵最大吸程 | 8m |
软管尺寸 | 按规格定制 |
设备类型 | 小型软管泵 |
设备用途 | 工业软管泵、输送软管泵 |
工作原理 | 滚轴挤压式循环往复 |
参考价格 | 5000~85000 |
耐腐蚀性输送性能 | 可输送 |
食品果酱输送性能 | 可升级为不锈钢型软管泵,食品级软管 |
其他行业应用 | 根据输送物质类型,定制设计加工 |
交货周期 | 小型软管泵现货,大型定制 |
付款方式 | 预付30%,剩余货到付清 |
软管泵的典型用途:
化工行业,各种防腐蚀浆料和无机盐物料;石油、钻井、水处理、泥浆、石灰浆;采矿冶金的充填物料,矿浆输送;食品行业,油类物料及饮料,糊状料输送;造纸行业,纸浆、硫磺输送;建筑业,水泥沙浆、泡沫混凝土生产线,楼顶屋泡沫轻质流体物料;油漆、涂料、钛 、二氧化碳等物料输送。
Typical use of hose pump:
Chemical industry, various anti-corrosion slurry and inorganic salt materials; petroleum, drilling, water treatment, mud, lime slurry; filling materials for mining and metallurgy, slurry transportation; food industry, transportation of oil materials and beverages, paste; papermaking Industry, pulp and sulfur transportation; construction industry, cement mortar, foam concrete production line, rooftop foam light fluid materials; paint, coating, titanium dioxide, carbon dioxide and other materials transportation.
保养泵的方法:
1、泵注意绝缘电阻,长期搁置不用的或在潮湿环境中使用的电动抽液泵,使用前必须用500伏兆欧表测量绕组的绝缘电阻。
2、泵和电动油桶泵应经常检查,维修,在检查时,必须检查电源线:内接线,插头,开关是否良好,绝缘电阻是否正常,刷尾座是事松动,换向器与电刷接触良好,电枢绕级扩定子绕组是否是有适中断路现象,轴承及转动零件是否的损坏等等。
3、经常加脂,电动油桶泵为高速运转,润滑脂易于挥发,所以必须使轴承处的润滑能保持清洁,并注意添换。
多用途移动泵站的主要用途:
多用途移动泵站基于泵设计开发,大流量软管泵是市政给排水中常用的一种泵型,拥有大量的潜在用户,其产品主要用于污水、初沉污泥、浓缩污泥等的抽排输送。由于转子泵具备自吸能力强、耐干转、流量范围大、耐磨损的特点受到国内设计单位和使用单位的青睐。
The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.
豫信致诚机械设备有限公司拥有研发中心和 安徽六安路面抛丸机产品质量检测中心,并与全国十几家科技设计单位、大专院校建立了密切的协作关系。 安徽六安路面抛丸机产品营销网络遍布全国,在北京、广东、内蒙、江苏、湖北、山东等地区设有分公司和直销仓库。新的世纪,豫信致诚机械设备有限公司以雄厚的经济技术实力,优良的 安徽六安路面抛丸机产品品质,追求客户满意服务的经营理念,铸造中国 安徽六安路面抛丸机新形象。公司董事长携全体员工愿与海内外朋友真诚合作,共绘宏伟蓝图,共创辉煌!
众所周知软管泵在运行时,是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是,软管存放时间不宜过长,一般以一年为限。在停工期间,对装有软管的泵,若长期不用,每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处,减弱管子回弹性,影响其流量的输送。
It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.